- 52 - computer, unless you want to limit the type of wireless client allowed to connect to
your computer.
Use Mac Click this button to use the MAC address of the
Address wireless card as SSID. A prefix of ‘AP’ will be added.
Security Set the security options (wireless data encryption)
Setting Please refer to chapter 3-2 ‘Security Settings’ for details.
Country Please select the country code of the country or
Region Code region you live. Available options are 0-7, which will affect the available wireless
channels you can use:
0: FCC (US, Canada, and other countries uses FCC radio communication standards)
1: ETSI (Europe)
2: SPAIN
3: FRANCE
4: MKK
5: MKKI (TELEC)
6: ISERAL (Channel 3 to 9)
7: ISERAL (Channel 5 to 13)
Wireless Wireless protection will prevent data collision when
Protection there are both 802.11b and 802.11g clients. You can select ‘Auto’ to let configuration
utility to decide to use wireless protection or not. You can also select ‘ON’ or ‘OFF’ to
force the use of wireless protection or not.
Beacon(ms) You can define the time interval that a beacon signal should be send. Default value is
100. Do not modify this value unless you know what will be affected.
TX Power You can select the wireless output power here.
Please select a proper output power setting according to your actual needs. You may
not need 100% of output power if other wireless clients are not far from you.
Idle Time Select the idle time of your wireless network card. Default value is 300. Do not modify
this value unless you know what will be affected.
No forwarding Check this box and wireless clients will not be able
among wireless to share data with each other.
clients