ADSL Configuration The ADSL Configuration page allows users to set the configuration for ADSL
protocols.
Trellis: This field allows the user to enable or disable the Trellis Code. By default, it is
always enabled.
Handshake Protocol: This field allows the user to select the ADSL handshake
protocol.
Wiring Selection: This field allows the user to enter the wiring selection for the RJ-11.
Tip/Rip is the default for the board without the inner/outer pair relay.
Bit Swapping: This field allows the user to enable or disable the upstream bit
swapping.
Note: Click the Submit button to save the settings in temporary memory. If you make
changes the configurations.
35