MAC Filtering The MAC Filtering configuration page allows the user to set the configuration of IP
filtering. Enable and Disable MAC filtering by selecting the “Yes” or “No” radio buttons.
Source MAC: When the bridge filtering is enabled, enter the Source Mac address,
Select Block and click Add. Then all incoming WAN and LAN Ethernet packets
matched with this source MAC address will be filtered out. If the Forward is
selected, then the packets will be forwarded to the destination PC.
Destination MAC: When the bridge filtering is enabled, enter the Destination MAC
address, select Block and click Add. Then all incoming WAN and LAN Ethernet
packets matched with this destination MAC address will be filtered out. If the
Forward is selected, then the packets will be forwarded to the destination PC.
Type: Enter the hexadecimal number for the Ethernet type field in Ethernet_II packets.
52