53
Field
Description
IP Subnet Mask
You can enter the IP subnet mask for dial-up, which
is provided by your ISP.
Gateway
You can enter the gate way IP for dial-up, which i s
provided by your ISP.
NAT
Select whether to enable Network Address
Translation (NAT) function. If you do not enable NAT,
you must add a route on the upl ink equipment,
otherwise Internet access will fail. Normally NAT is
enabled.
Dynamic Route
You can select RIP1, RIP2-B or RIP2-M.
Direction
You can select None, Both, IN Only or OUT Only.
Multicast
IGMP (Internet Group Multicast Protocol) is a
session-layer protocol used to establish membership
in a multicast group. The ADSL Router supports both
IGMP version 1 (IGMP-v1) and IGMP version 2
(IGMP-v2). Select Disabled to disable it.
IPv6 Options
IPv6 Address
Set Static IPv6 address.
IPv6 Default
Gateway
Set Static IPv6 Gateway.
IPv6 DNS Server1
Set Static IPv6 DNS1.
IPv6 DNS Server2
Set Static IPv6 DNS2.
MLD Proxy
You may enable or disable MLD Proxy. MLD proxy is
enabled only for route mode. It works in an IPv6
environment.
Dual Stack Lite
Enable
You may Enable or Di sable the Dual Stack Lite. The
ADSL Router support IPv4/v6 Dual Stack Internet
Protocol.