Chapter 4 Replacement Procedures
Installing the keyboard
The following describes the procedure for installing the keyboard.
1.Connect the keyboard flexible cable to the connector on the system board.
2.Slide and set the keyboard then secure it with the following screw.
∙ M2.0×3.0B FLAT BIND screw | x2 |
3.Install the K/B holder by pressing it from the topside.
4.Upside down the computer and secure the KB holder with the following screw.
M2.0×2.0B FLAT BIND screw | x2 |
Satellite T130, Satellite Pro T130 , and PORTEGE T130Maintenance Manual
