Chapter 4 Replacement Procedures
4.13 CPU
Removing the CPU heat sink
The following describes the procedure for removing the CPU heat sink (See Figure
1.Disconnect the Heat sink cable from the connector on the system board
2.Remove the following screws securing the heat sink holder along 1 to 3.
∙ M2.0×3.0 | screw | x3 |
NOTE: When removing the heat sink holder, be sure to remove the screws in the reverse order of the number marked on the holder.
Figure 4-13-1 Remove the CPU heat sink
Satellite T130, Satellite Pro T130, and PORTEGE T130 Maintenance Manual |
| 50 |
