
Chapter 4 Replacement Procedures
4.11 I/O Board
The following describes for removing the cover assembly (See Figure
Removing the I/O Board
1.Pull out the I/O Board FFC, LAN FFC, Speaker cable from I/O board connector.
2.Loose the below screws and then incline pull out I/O Board.
∙ | M2.0x3.0 | FLAT BIND screw | x2 |
Figure 4-11-1 Remove the I/O Board
|
|
|
Satellite T130, Satellite Pro T130, and PORTEGE T130Maintenance Manual |