Toshiba PROT130, T130 - page 159

Chapter 4 Replacement Procedures
5. Remove the following screws securing the HDD holder and remove the HDD holder.
 M3.03.0B FLAT BIND screw x4
M3*3 4pcs
Figure 4-3-3 Remove HDD
Installing HDD-H9.5mm
The following describes the procedure for installing the main HDD.
1. Install a HDD to the HDD holder and secure it with the fo llowing screws.
 M3.03.0F FLAT BIND screw x4
NOTE: Although they are 3mm head screws, screw torque must be set in 2.5kg-cm for
four screws securing the HDD holder.
2. Insert the HDD assembly into the HDD slot and connect it carefully to the MAIN
HDD on the system board.
3. Use a T6-bit TORX to secure the HDD assembly with the following screw.
 M2.04.0B T6 screw x2
Satellite T130, Satellite Pro T130 , and PORTEGE T130Maintenance Manual (960-Q08)