Chapter 3 Test Program for Field
Pass Count | Displays the number of times the test has been executed. |
Error Count | Displays the number of errors which have occurred during the test. |
Write Data | Displays only the test data that has failed to compare during the |
| test while being written during the test. |
Read Data | Displays test data that has failed to compare during the test while |
| being read during the test. |
Test Address | Displays the Test Address. (The format differs for each test.) |
Error Status | Displays the error status. |
Error Name | Displays the name of the error. |
3.21.4Test Stop Display
If an error occurs during a Subtest and YES is selected for Error Stop, the following message displays:
[HALT OPERATION]
1.Test end
2.Continue
3.Retry
*Select 1, 2, or 3
The three selections have the following functions:
1:Terminates the test program and exits to the subtest menu.
2:Continues the test from the error.
3:Restarts the test from the beginning.
Use the arrow keys to move the cursor to the desired option and press Enter.
3.21.5 How to enter data
Letters which must be entered are always shown in [ ]. Simultaneous entries are displayed by a “+” mark. For example:
[a] [Enter]
Press the “a” key, then press the [Enter] key.
[Ctrl] + [c]
Press the [Ctrl] key and the “c” key simultaneously.
Satellite T130, Satellite Pro T130, and PORTEGE T130 Maintenance Manual
