Toshiba PROT130 manual Hdd, Removing a HDD-H9.5mm

Chapter 4 Replacement Procedures

4.3HDD

Removing a HDD-H9.5mm

The following describes the procedure for removing the HDD (See Figure 4-3-1 to 4-3-3).

CAUTION: Take care not to press on the top or bottom of a HDD. Pressure may cause data loss or damage to the device.

1.Turn the computer upside down.

2.Remove the following screws with a T6-bit TORX securing a HDD slot cover and remove a HDD slot cover.

∙ M2.0×4.0B FPH(T6) screw x2

3. Remove the following screws securing the HDD assembly.

∙ M2.0×3.0B FLAT BIND screw x2

4.Disconnect the HDD assembly from the connector on the system board.

MAIN HDD

Satellite T130, Satellite Pro T130 , and PORTEGE T130Maintenance Manual (960-Q08)