Chapter 4 Replacement Procedures
4.6Wireless LAN card and BT Module
Removing a Wireless LAN card
The following describes the procedure for removing a Wireless LAN card (See Figure
1.Remove the screw of wireless LAN card.
∙ M2x 2.5 | BIND screw | x2 |
2.Disconnect the wireless LAN antenna cable from the connectors on a wireless LAN card.
3.Remove a wireless LAN card from the connector on the system board.
Figure 4-6-1 Wireless LAN card
Satellite T130, Satellite Pro T130 , and PORTEGE T130Maintenance Manual