Chapter 4 Replacement Procedures
4.7 3G module card
Removing 3G module card
The following describes the procedure for removing a 3G module card (See Figure 4-7-1
to 4-7-3).
1. Remove screw of 3G module board.
M2x 3.0 BIND screw x2
2. Disconnect the 3G module antenna cable from the connectors on a 3G module card
3. Remove a 3G module card from the connector on the system board.
Figure 4-7-1 3G module card
Satellite T130, Satellite Pro T130 , and PORTEGE T130Maintenance Manual (960-Q08)