Chapter 2 Troubleshooting Procedures

Procedure 2 Connector and Replacement Check

The connection of cable and board may be defective. Otherwise, they may be faulty. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures, and perform the following checks:

Check 1 Make sure the cable is firmly connected to system board.

If the connection is loose, reconnect firmly and repeat Procedure 1. If the problem still occurs, go to Check 2.

Check 2 Touch Pad or the cable may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures. If the problem still occurs, perform Check 3.

Check 3 System board may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures

 

 

 

Satellite T130, Satellite Pro T130 and PORTEGE T130Maintenance Manual (960-Q08)

￿￿￿￿￿￿

Page 58
Image 58
Toshiba PROT130 manual Procedure 2 Connector and Replacement Check