Chapter 2 Troubleshooting Procedures

Procedure 4 Diagnostic Test Program Execution Check

The HDD test program is stored in the Diagnostics Disk. Perform all of the HDD tests in the Hard Disk Drive Test. Refer to Chapter 3, Tests and Diagnostics, for more information about the HDD test program.

If an error is detected during the HDD test, an error code and status will be displayed. The error codes and statuses are described in Table 2-5-1. If an error code is not displayed but the problem still occurs, go to Procedure 5.

Table 2-5-1 HDD error code & status

 

 

 

Satellite T130, Satellite Pro T130 and PORTEGE T130Maintenance Manual (960-Q08)

￿￿￿￿￿￿

Page 53
Image 53
Toshiba PROT130 manual Procedure 4 Diagnostic Test Program Execution Check