Toshiba PROT130 manual Return to the Multimedia Test menu

Chapter 3 Test Program for Field

3.13 Multimedia Test

To execute the Multimedia Test select 10 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Multimedia Test contains four subtests that test the computer's multimedia functions. Move the highlight bar to the subtest you want to execute and press Enter.

NOTE: Use the Toshiba Backup CD-ROM for Subtests 01, 02, and 03.

Because CDROM driver issue, the Multimedia function can’t test , this is limitation .

Subtest 01	Sequential Read Test
	This subtest sequentially reads one block unit (2K bytes) of all logical
	addresses from the test CD.
		NOTE: If NO is selected for Test Loop on the Test Parameter Menu, the
		screen will remain blank while the subtest is executing. When the test is
		complete the Multimedia Test menu displays.
		If YES is selected for Test Loop on the Test Parameter Menu, the Test
		Status screen displays while the subtest is executing. Press Ctrl + break to
		return to the Multimedia Test menu.
Subtest 02	Random Read Test
	This subtest randomly reads all addresses.
Subtest 03	Read Specified Address Test
	This subtest reads data from a specified block of addresses.
	The following message displays on the screen to enter the start and end block
	addresses:
		START BLOCK ADDRESS?	?
		END BLOCK ADDRESS
Subtest 04	1 Point W/R/C (R/RW Media)
		NOTE: Use CD-R or CD-RW, the CD-ROM and DVD cannot be used for
		this subtest, and some DVD-dual can’t support this test.
	This subtest writes specified data to a specified block count, then reads and
	compares the result.

Satellite T130, Satellite Pro T130, and PORTEGE T130 Maintenance Manual (960-Q08)