55
Field
Description
Encapsulation
You can choose PPPoE LLC, PPPoE VC-Mux, PPPoA
LLC or PPPoA VC-Mux.
IP Unnumbered
Select Activated or Deactivated.
Connection Setting
Connection
You can choose Always On (Recommended),
Connect On-Demand or Connect Manually.
TCP MSS Option
You can set a TCP MSS value. The range is from 100
to 1452. The default is 1400.
IP Common Options
Default Route
You can enable or disable default route.
IPv4 Address
Get IP Address
You can choose Static or Dynamic.
Static IP Address
You can enter the IP address for dial-up, which is
provided by your ISP.
IP Subnet Mask
The default is 255.255.255.255.
Gateway
You can enter the gateway IP for dial-up, which is
provided by your ISP.
TCP MTU Option
You can set a TCP MTU value. The range is from 100
to 1500. The default is 1492.
NAT
Select whether to enable Network Address
Translation (NAT) function. If you do not enabl e NAT,
you must add a route on the upl ink equipment,
otherwise Internet access will fail. Normally NAT is
enabled.
Dynamic Route
You can select RIP1, RIP2-B or RIP2-M.
Direction
You can select None, Both, IN Only or OUT Only.
Multicast
IGMP (Internet Group Multicast Protocol) is a
session-layer protocol used to establish membership
in a multicast group. The ADSL Router supports both
IGMP version 1 (IGMP v1) and IGMP version 2 (IGMP