82
The following table describes the parameters of this page:
Field
Description
Get Community
Select to set the password for th e incoming Get- and
GetNext requests from the management station.
Set Community
Select to set the password for incoming Set requests from
the management station.
5.6.4. UPnP
Choose Access Management > UPnP, the page shown in the following figure
appears. This page is used to configure the UPnP parameters.
UPnP (Universal Plug and Play) is a distributed, open networking standard
that uses TCP/IP for simple peer-to-peer network connectivity between
devices. An UPnP device can dynamically join a network, obtain an IP address,
convey its capabilities and learn about other devices on the network. In turn,
a device can leave a network smoothly and automatically when it is no longer
in use. UPnP broadcasts are only allowed on the LAN.
The following table describes the parameters of this page:
Field
Description
UPnP
You can choose Activated or Deactivated.
Auto-configured
UPnP network devices can au tomatically configure
network addressing, announce their presence in the
network to other UPnP d evices and enable exchange of
simple product and service descriptions.