Edimax Technology AR-7186WNB 5.4. Interface Setup

Field

Description

255. Enter the correct VPI provided by your ISP. By default,

VPI is set to 8.

VCI

Virtual channel identifier (VCI) is the virtual channel between

two points in an ATM network. Its valid val ue is between 1

and 65535. Enter the correct VCI provided by your ISP. By

default, VCI is set to 35.

Connection

Type

You can select LLC or VC-Mux. In this example, the

encapsulation mode is set to PPPoE LLC.

After setting, click NEXT, the page as shown in the following figure appears.

Click BACK to modify the settings.

Click NEXT to save the settings.

Click EXIT to cancel the settings.

Note:

After you saving the settings in the Quick Start page, you can view this

wan connection settings in the Interface Setup > Internet page.

5.4. Interface Setup

In the navigation bar, click Interface Setup. The Interface Setup page that is

displayed contains Internet, LAN and Wireless.

Choose Interface Setup > Internet. The Internet page that is displayed

contains ATM VC, Qos, IPv4/IPv6 and Encapsulation.

Click Internet pane, the page shown in the following figure appears. In this

page, you can configure the WAN interface of your router.