Wireless LAN Acc ess Point Configuration
Chapter 3 Wireless LAN Access Point Configurati on 3.1 Getting Started
This Access Point provides web-based configuration tool allowing you to configure
from wired or wireless stations. Follow the instructions below to get started
configuration.
From Wired Station
1. Make sure your wired station is in the same subnet with the Access Point.
The default IP Address and Sub Mask of the Access Point is:
Default IP Address: 192.168.2.1
Default Subnet: 255.255.255.0
Configure yo u r PC to be in the same su bnet with the Acces s Point.
1a) Windows 95/98/Me
1. Click the Start button and select Setting s, then click Control Panel. The Control Panel
window will appear.
2. Double-click Network icon. The Ne tw o r k win dow will appear.
3. Check your list of Network Components. If TCP/IP is not installed, click the Add button to
install it now. If TCP/IP is installed, go to step 6.
4. In the Network Component Type dial og box , selec t Protocol and cl ic k Add button.
5. In the Select Network Protocol dialog box, select M icr osoft and TC P/IP and then click the
OK button to start installing the TCP/IP protocol. You may need your Windows CD to
complete the installation.
6. After installing TCP/IP, go back to the Network di alog box . Sel ect TCP/IP from the list of
Network Components and then click the Properties button.
7. Check each of the tabs and verify the following settings:
• Bindings: Check Client for Microsoft Networks and File and printer sharing for
Microsoft Networks.
• Gateway: All fie lds are blank .
• DNS Configuration: Select Di sable DNS.
• WINS Configuration: Select Disable WINS Resolution.
6