Edimax Technology EW-7206Apg 1.4 Physical Description

Introduction

y Humidity: 10-90% (Non-condensing)

y Certific at ion : FCC, CE

1.4 Physical Description

On the Access Point’s front panel there are LED lights that inform you of the Access

Point’s cur r ent st at us. Below is an exp lanation of eac h LED.

LED Color Status Description

Lit Power is supplied.

Power Gr een Off No Power.

Flash Antenna is transmitting or receiving data. Wireless

Activity Green Off Antenna is not transmitting or receiving data.

On A valid link is established.

Flash It is transmitting or receiving data.

LAN

Link/Activity Green

Off No link is established.

Access Point’s connection ports are located on the back panel. Below is the

description of each connection port.

Contents

Main Table of Contents Chapte r 4 Troubleshooting .....................................................................43 Chapter 1 Introduction 1.1 Package Contents 1.2 Features 1.3 Specifications 1.4 Physical Description Front Panel Back Panel Page Chapter 2 Wireless LAN Access Point Connection Chapter 3 Wireless LAN Access Point Configurati on 3.1 Getting Started 8. Reboot the PC. Your PC will now have the IP Address you specified. 1b) Windows XP 1c) Windows 2000 Page Page 3.2 Configuring the Access Point 3.2.1 Stat us a nd I nfo r ma tio n 3.2.2 Wire le s s Se tt ing Page Page Page Page MAC A ddress WLAN MAC Root AP S S I D Set Security Associated C lients Set Security Page Active Wi rele ss Clie nt Table Wireless Site Survey 3.2.3 Advanced Setting Authent ic at ion Type Fragment T hr e shold RTS Threshold Beacon Interv al Data R ate Preamble T y pe Broadcast ESSID If you enable Broadcast ESSID, every wireless station located within IAPP 3.2.4 Security WEP only Page 802.1x only 802.1x WEP static key WPA pre-shared key Parameter Description WPA RADIUS Page 3.2.5 MAC Address Filtering Page 3.2.6 Syste m Utility Page Page Page 3.2.7 Configuration Tool Page 3.2.8 Firmware Upgrade 3.2.9 Reset Chapter 4 Troubleshooting