Wireless LAN Acc ess Point Configuration
Set Security “Set Security” let you setup the wireless security for the data transmission between
the bridged access points in “AP Bridge-Point to Point mode”, “AP Bridge-Point to
Multi-Point mode” or “AP Bridge-WDS mode”. It provides “WEP 64bits”, “WEP
128bits”, “WPA (TKIP)”, “WPA2 (AES)” encryption methods.
Parameter Description
Encryption You can select “No encryption”,“WEP 64bits”, “WEP 128bits”, “WPA
(TKIP )” or “WPA2 (A ES)” encry p tion meth od s.
Key Format This is only used when you select “WEP 64bits” or “WEP 128bits”
encryption method. You may select to select ASCII Characters
(alphan umeric fo rm at) or He x ad ecimal Di gi ts (in the “A -F”, “a-f” a nd “0-9”
range) to be the WEP Key. For example:
ASCII Characters: guest
Hexa decim al Di gi ts: 12 345ab cde
WEP Key This is only used when you select “WEP 64bits” or “WEP 128bits”
encryption method. The WEP key is used to encrypt data transmitted
between the bridged access points. Fill the text box by following the rules
below.
64-bit WEP: input 10-digit Hex values (in the “A-F”, “a-f” and “0-9” range)
18