Here are the descriptions of every setup item:
Item | Description |
Enable Filter | Check this box to enable IP address filter, uncheck this |
| Box to disable this function. |
Accepted IP list | Here lists all IP address that can build connections to this IP |
| camera. If you want to remove a set of IP address from the |
| list, click on the IP address and click ‘Remove’ button. |
IP Address | Input the starting and ending IP address of IP address you |
(Accepted IP list) | wish to accept connections here. IP camera will only accept |
| connections established from these IP address. |
| If you want to specify one IP address only, input the |
| same IP address in both field. |
| Click ‘New’ button to add IP address into accepted |
| IP list. |
Deny IP list | Here lists all IP address that cannot build connections to this |
| IP camera. If you want to remove a set of IP address from the |
| list, click on the IP address and click ‘Remove’ button. |
IP Address | Input the starting and ending IP address of IP address you |
(Accepted IP list) | wish to deny connections here. IP camera will deny |
| connections established from these IP address. |
| If you want to specify one IP address only, input the same IP |
| address in both field. |
| Click ‘New’ button to add IP address into deny |
| IP list. |
When you finish with above settings, click ‘Apply’ button to save changes.
30
