Here are the descriptions of every setup item:
Item | Description |
Enable Filter | Check this box to enable IP address filter, uncheck |
| this Box to disable this function. |
Accepted IP list | Here lists all IP address that can build connections |
| to this IP camera. If you want to remove a set of IP |
| address from the list, click on the IP address and |
| click ‘Remove’ button. |
IP Address | Input the starting and ending IP address of IP |
(Accepted IP list) | address you wish to accept connections here. IP |
| camera will only accept connections established |
| from these IP address. |
| If you want to specify one IP address only, input the |
| same IP address in both field. |
| Click ‘New’ button to add IP address into accepted |
| IP list. |
Deny IP list | Here lists all IP address that cannot build |
| connections to this IP camera. If you want to |
| remove a set of IP address from the list, click on the |
| IP address and click ‘Remove’ button. |
IP Address | Input the starting and ending IP address of IP |
(Accepted IP list) | address you wish to deny connections here. IP |
| camera will deny connections established from |
| these IP address. |
| If you want to specify one IP address only, input the |
| same IP address in both field. |
| Click ‘New’ button to add IP address into deny |
| IP list. |
When you finish with above settings, click ‘Apply’ button to save changes.
32
