Edimax Technology PT-112E, MD-111E Time Setting Time zone, Daylight saving, Current Time, Manual

Network Camera User’s Manual

2. “Time Setting”

(1) “Time zone”

Choose a time zone from the down arrow.

(2) “Daylight saving”

For summertime; It will be one hour ahead.

(3) “Current Time”

Network camera set the current time.

(A) “Keep current date and time”

Click on this to keep the current date and time of the Network Camera. An internal real-time clock maintains the date and time even when the power of the system is turned off.

(B) “Sync with computer time”

Synchronize the date and time in the Network Camera according to the local computer.

(C) “Manual”

Adjust the date and time by the Administrator.

(D)“Adjust by NTP server”

Synchronize the time according NTP server over the Internet whenever the Network Camera is switched on. It fails if the assigned time-server cannot be found.

(a)“NTP server” Assign the IP address or domain name of the time-server. Leaving the text box blank connects the Network Camera to the default time-servers.

(b)“Update interval” Select 0 ~ 23 hours update with the time on the NTP server.

Remember to click on “Finish” to immediately validate the changes. Otherwise, the correct time will not be synchronized.

18/59