Syslog | Edimax Technology PT-112E & MD-111E, PT-111E specs

Network Camera User’s Manual

Syslog

The Network camera supports log the system messages on remote server.

The protocol is compliant to RFC 3164. If you have external Linux server with sys log service, use ―-r‖ option to turn on the facility for receiving log from remote machine. Or you can use some software on Windows that is compliant to RFC 3164. An example is Kiwi Syslog Daemon. Visit http://www.kiwisyslog.com/kiwi-syslog-daemon-overview/.

Check “Setup‖ and ―Enable‖ then input the “IP address‖ and “port” number of the log server to enable the remote log facility.

In the “Current log”, it displays the current system log file. The content of the log provides useful information about configuration and connection after system boot- up. “finish” Click on this button to save modify settings.

38/59

Image 38

Edimax Technology PT-112E & MD-111E, PT-111E user manual Syslog

Contents

PT-111E / PT-112E & MD-111E Table of Contents Overview Minimum System Requirement Package Contents Connections Wired cover Slide coverReset button Micro SD/SDHC Internal Microphone Light sensor Lens Hardware Installation Power over Ethernet PoE  Using a PoE-enabled switch Connect to the Network Camera Locate the IP address of Network IP Camera Network Camera User’s Manual Initial Access to the Network Camera Video will be displayed Configuration functions Primary user’s capability Camera view View capabilities Pan/Tilt & connection control buttons PT-111E / PT-112E only Client Setting 16/59 LED indicator Definitions in ConfigurationGeneral Setting Host name System parameters Daylight saving Time Setting Time zoneAdjust by NTP server Current Time Manage user Security settingSecurity 20/59 LAN & PPPoE Network SettingNetwork LAN PPPoE Ddns SettingGet IP address automatically Use fixed IP address 23/59 Access list Access list setting Audio and Video setting General Setting Audio Setting Video SettingInfrared Led Setting Schedule information Schedule modeVideo record Record parameters 1NAS Stream Audio codec settingVideo codec setting Bit rate Snapshot and time display setting Camera control PT-111E / PT-112E only Camera control Patrol list setting Application Sun/Mon/Tue/Wed/Thu/Fri/Sat Select the days Snapshot & Record file setting Trigger modeMedia mode Response mode 4NAS NAS server setting Storage Status File operation Syslog Status and Parameters Maintenance Export/Import file Q2 What kind of Ethernet cable is used by network camera? AppendixQ1 Status led does not light up 43/59 44/59 Q6 How can I restore the network camera to default value? Q10 The cover of network camera is warm. Is it normal? Q12 The process of upgrade firmware abortQ7 I cannot play the recorded video file Camera from Internet Explorer A13 Ip-discovery.comFree Ddns service 49/59 Current device Federal Communication Commission Interference Statement EU Countries Not Intended for Use EU Declaration of Conformity Weee Directive & Product Disposal 55/59 56/59 No Warranty 58/59 Network Camera User’s Manual 59/59