Network Camera User’s Manual
(2)“Mirror” Horizontally rotates the video.
3.“Environment” The orientation of video
(1)“indoor” This option is usually selected when the Network Camera is placed in indoor environments.
(2)“outdoor” This option is usually selected when the Network Camera is placed in outdoor environments.
4.“Power freq.” Select 50 Hz or 60Hz power line frequency.
※The fluorescent light will flash according to the power line frequency that depends on local utility. Change the frequency setting to eliminate uncomfortable flash image when the light source is only fluorescent light.
Video Setting
1.“Contrast” Adjust the image contrast level, which ranges from
2.“Brightness” Adjust the image brightness level, which ranges from
3.“Saturation” Adjust the image saturation level, which ranges from
4.“Sharpness” Adjust the image sharpness level, which ranges from
5.“EV” Exposure value represent the expected target value of the luminance of the weighting result of AE windows in the image and its tolerance as offset.
6.“Gain” In the slide bar of Gain, there are also two sliders, which represent the limitations to control the maximum gain value and the minimum one, respectively. Normally, the minimum value is to 1x for better quality.
Infrared Led Setting
1.“Infrared LED Control” IR led for Day and Night (Option). User can turn on/off the
(1)“Auto” Select IR sensitivity from 0 to 4.
(2)“Manual” Turn on/off the IR led manually.
-“Turn on” Turn on led
-“Turn off” Turn off led
2.“Low lux mode” The video quality will be improved when the camera is in low lux environment.
(1)“Disable dark mode” Disable low lux mode.
(2)“Enable dark mode” Enable low lux mode.
Audio Setting
1.“Mute” Audio mute.
2. “Microphone ” Internal microphone.
3. “Mic Volume” Adjust microphone volume, which ranges from 1 to 64.
26/59
