3-3 OPERATION -- AUTO SCAN &

RESET BUTTON

2. To activate Automatic SCAN mode:

Push and immediately release the SCAN button right below the SCAN LED to activate SCAN mode.

The built-in buzzer will beep to confirm the activation. The SCAN LED will be lit to indicate the operation of SCAN mode.

3. To deactivate Automatic SCAN mode:

Press any PC SELECT button or SCAN button.

The built-in buzzer will beep once to confirm the deactivation. The SCAN LED will be turned off to indicate the end of SCAN mode.

Reset Button

Press the Reset button will automatically reset the RAS106/108 KVM Switches' keyboard and mouse emulation processors. In normal operation, users do not need to use the reset function. In case of losing keyboard or mouse connection during operation, you may press the Reset button to force the RAS106/108 to re-initiate the emulation and re-establish the connection.

Do not move the mouse or typing the keyboard during the reset process. The built-in buzzer will sound a long beep to confirm the activation of reset. The reset process will be complete within three (3) seconds.

Page 15
Image 15
Edimax Technology RAS106, RAS108 manual Reset Button