36
Playing back
fig.recording-1.eps
1
Press the R-4’s
[SYSTEM]
button.
The system menu screen appears in the display.
fig.player-setup2.eps
2
Use the
[CURSOR] buttons
to choose
2 Playing Setup
, and
press the
[ENTER] button
.
The Recording Setup screen appears.
3
Use the
[SCRUB/VALUE] dial
to choose the
Play Mode
value.
* The setting is applied as soon as you select it. You don’t need to press
the [ENTER] button.
Make settings for the following items as well.
* For more about system settings, refer to
“System settings”
(p. 60).
Settings before playback
Player Setup
Menu Player Setup
settings Playback method
Play Mode
Single
Selects the playback mode.
Only the selected project will play.
Sequential The projects in the folder containing the currently selected project will
play consecutively.
Repeat
OFF
, ON
Selects whether playback will repeat.
If
Play Mode
is
Single
, only that project will play repeatedly. If it is
Sequential
, the projects in the folder containing the currently select-
ed project will play consecutively, and then the projects in the same
folder will again play consecutively from the beginning.
X2 Play OFF,
ON
This enables/disables the function that provides double-speed play-
back when you press the
[PLAY] button
a second time during play-
back (i.e., when you press [PLAY] twice).
The indication
PLAY X2
will appear in the lower part of the display.
Normal playback will resume when you press the [PLAY] button
once again.
R-4_e.book 36 ページ ２００５年２月１０日 木曜日 午後３時３６分