76
Application guide
Here are basic settings for recording birdsongs or similar sounds outdoors. Since you’ll need to run on
batteries outdoors, the settings take power conservation into account.
Panel settings
Recording Setup
LCD Setup
System Setup
Recording birdsongs outdoors
Input level select switch
MIC
Phantom power switch
ON if you’re using a condenser mic that requires phantom power; otherwise
OFF
Input Select
Analog By lowering the sampling frequency (Rec Freq.) and
limiting the number of tracks, you can minimize the
size of the file to be written. This will decrease the
amount of access to the hard disk, thereby conserving
power.
Rec Freq.
44.1 kHz
Rec Bit
16 bit
Rec Mode
STEREOx1,
MONOx1 Set to match the mics that are connected.
Pre Recording
4 sec
The pre-recording setting lets you press the record
button when you hear birdsong; sounds that oc-
curred several seconds earlier will be captured retro-
actively. If you’re trying to capture birdsong, a
setting of four seconds will be sufficient. In compari-
son to allowing recording to continue, this method
will minimize the number of accesses to the internal
hard disk.
However, with any pre-recording setting other than
OFF, recording will always be occurring internally.
Project Name
Date Using the Date setting will make it easy to tell the
date and time that the recording was made.
BackLight Timer
5 sec
Battery Type
Set to the type of batteries you’ve installed
R-4_e.book 76 ページ 2005年2月10日 木曜日 午後3時36分