Edirol V-4 , Front Panel

14

Before you begin

3.

Power cable hook

Use this hook to retain the power cable so that it will not be accidentally unplugged.

4.

MIDI OUT connector (MIDI OUT)

MIDI messages input from an external device are output without change (“thru-ed”) from this

connector. When using V-LINK to control both the V-4 and a DV-7PR, connect this output to the

input of the DV-7PR.

5.

MIDI IN connector (MIDI IN)

Use this connector to input control signals sent from an external device to the V-4.

6.

S-video output jack (S-VIDEO OUTPUT)

This jack outputs a S-video signal.

7.

S-video input jacks (S-VIDEO INPUT)

These jacks input S-video signals.

Front Panel

8.

Video (composite) input jacks (INPUT)

These jacks input video (composite) signals. If both video (composite) and S-video signals are input

simultaneously to the same channel (channel 1 or 2 only), the S-video signal will take priority, and

the video (composite) signal will be ignored.

9.

Preview select buttons (PREVIEW OUT SELECT) (see p. 20)

These buttons select the image that will be output to the preview monitor. You can select one of the

input signals of channels 1 through 4, or the mixed output signal.

10.

Preview output jack (PREVIEW OUT)

This jack outputs the preview monitor signal. Simultaneously, MIDI and effect parameters are also

output to the preview monitor.

11.

Video (composite) output jacks (OUTPUT)

These jacks output video (composite) signals. In conjunction with the S-video output jack, these

jacks let you simultaneously output to three TV monitors or projectors.

12.

Parameter setting buttons

These buttons are used to set various parameters for each button. The parameters are displayed on

the TV monitor connected to the preview output jack.

13.

BPM indicator (see p. 39)

This displays the current BPM (Beats Per Minute) setting. You can turn the dial below to change

the displayed setting.

14.

Tap button (TAP) (see p. 39)

This button is used to control BPM. The speed at which this button is tapped affects the BPM

setting.

15.

Output fade dial (OUTPUT FADE) (see p. 25)

This dial is used to apply fade-to-white or fade-to-black to the final output. Turn the dial toward

V-4_e.book 14ページ２０１０年３月１１日　木曜日　午後１時５１分

Contents

Main Owners Manual NOTICE AVIS FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT WARNING Page IMPORTANT NOTES Copyright Additional Precautions Maintenance Installation of Video Fader About specifications About turning the power on Contents Page Page Features of the V-4 What is V-LINK? V-4 V-LINK What is V-LINK? Roland/Edirol product that supports V-LINK V-LINK Before you begin Check the included items Names of things and what they do 2. 1. Rear Panel Front Panel Page About Ground Terminal Connecting peripheral devices Connecting peripheral devices Typical connection example Connecting peripheral devices Video signal flow Turning the power on/off Turning the power on/off Turning the power off Turning the power on Checking the inputs and outputs Checking the output to the preview monitor Checking the final output About the display on preview monitor About the Memory dial (MEMORY) About the Memory dial (MEMORY) Switching two images Switching by Cut or Switching with dissolve Switching with Wipe Using fade-to-white or fade-to-black Compositing two images Using Picture In Picture to composite images Using Chroma Key to composite images Using Luminance Key to composite images Page Page Changing the color of the image Changing the color of the image Applying the Negative effect Changing the color of the image Applying the Colorize effect Page Changing the motion of the image Changing the motion of the image Applying strobe motion Applying the Multi or Mirror effects Applying the Multi or Mirror effects Applying the Multi effect Applying the Multi or Mirror effects Applying the Mirror effect Switching in synchronization with music Switching in synchronization with music Using BPM sync to switch images Switching in synchronization with music Using the tap (TAP) function to switch images Applying an effect on the music Applying an effect on the music Using the tap (TAP) function to apply an effect Using BPM sync to apply an effect Editing the front panel assignments Page Changing the assignment of the mix button (MIX) Changing the assignment of the wipe button (WIPE) Changing the assignment of the EFX button (EFX) Page Changing the assignment of the output fade dial (OUTPUT FADE) Page Changing the assignments of the channel A and B effect buttons (EFFECTS) or Changing the assignment of the BPM sync button (BPM SYNC) Changing the assignment of the channel A/channel B transformer buttons (TRANSFORMER) Page Protecting the memory Copying or exchanging memories Recalling the factory settings Page Control the V-4 from an external device (Example) When using an Edirol PCR-30/50 in conjunction with the V-4: (Example) When using a Roland MC-909 in conjunction with the V-4: What is V-LINK? Using MIDI to control the V-4 Page Setting the MIDI transmit channel (MIDI Tx Channel) MIDI settings Setting the MIDI receive channel (MIDI Rx Channel) Page Page Making various settings Making various settings Page Calibrating the video fader Calibrating the video fader Calibrating the video fader Using the V-4 in Presentation mode Using the V-4 in Presentation mode What is Presentation mode? Switching to Presentation mode Presentations using two screens with Picture In Picture Using the V-4 in Presentation mode Page Changing the video fader orientation Changing the video fader orientation Page Troubleshooting Menu List Page Effects-A Effects-B [Mem2-8] [Mem2-8] A-Efx1 A-Efx2 A-Efx3 A-Efx4 B-Efx1 B-Efx2 B-Efx3 B-Efx4 Transformer [Mem2-8] Output Fade [Mem2-8] Page Page Page Utility OutFade White Level OutFade Black Level Preview Display Mode Preview Switch Pattern Main specifications Page Examples of using the V-4 Using the V-4 at an event Using the V-4 at a concert or VJ performance Using the V-4 at a presentation Using BGV output with a musical performance (example of using V-LINK) MIDI implementation Control Change Note-on Channel voice messages 1. MIDI messages received at MIDI IN System exclusive messages System realtime messages Pitch Bend Change Channel Pressure Program Change Control Change 3-1. V-4 (Model ID= 00H 5BH) 3. Parameter Address Map 3-2. V-LINK (Model ID= 00H 51H) A ch effect 2 A ch effect 1 Transition Time Note Mode Factory Setting of V-LINK Others Mode MIDI Implementation Function... Transmitted Recognized Remarks Page Page Page Page Page Luminance Key Page Page Index Page NOTICE AVIS FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT WARNING Owners Manual