95
MIDI Implementation
A ch effect 3
This specifies effect 3 on/off and the parameter for channel A in Normal mode or the base
channel in Presentation mode.
With the factory settings this is unassigned.
Values are 0, 1–127, corresponding to OFF, ON:0–Max.
A ch effect 4
This specifies effect 4 on/off and the parameter for channel A in Normal mode or the base
channel in Presentation mode.
With the factory settings this is unassigned.
Values are 0, 1–127, corresponding to OFF, ON:0–Max.
B ch effect 1
This specifies effect 1 on/off and the parameter for channel B in Normal mode.
With the factory settings this is unassigned.
Values are 0, 1–127, corresponding to OFF, ON:0–Max.
B ch effect 2
This specifies effect 2 on/off and the parameter for channel B in Normal mode.
With the factory settings this is unassigned.
Values are 0, 1–127, corresponding to OFF, ON:0–Max.
B ch effect 3
This specifies effect 3 on/off and the parameter for channel B in Normal mode.
With the factory settings this is unassigned.
Values are 0, 1–127, corresponding to OFF, ON:0–Max.
B ch effect 4
This specifies effect 4 on/off and the parameter for channel B in Normal mode.
With the factory settings this is unassigned.
Values are 0, 1–127, corresponding to OFF, ON:0–Max.
Transition Select
Selects the type of transition.
With the factory settings this is unassigned.
Values are 0-2, corresponding to Transition 1, Transition 2 and Transition 3.
Transformer A
Turns channel A TRANSFORMER on/off.
With the factory settings this is unassigned.
Values are 0-63 and 64-127, corresponding to OFF and ON.
Transformer B
Turns channel B TRANSFORMER on/off.
With the factory settings this is unassigned.
Values are 0–63 and 64–127, corresponding to OFF and ON.
Output Fade
Controls OUTPUT FADE.
With the factory settings this is unassigned.
Values are 0 - 64 - 127, corresponding to Black - Center - White.
BPM Sync
Switches BPM SYNC on/off.
With the factory settings this is unassigned.
Values are 0-63 and 64-127, corresponding to OFF and ON.
Video Fader
Controls the VIDEO FADER.
With the factory settings this is assigned to CC#11 (Expression).
Values are 0-127, corresponding to A (base)-B (sub).
Factory Setting of V-LINK
The factory setting of V-LINK (receipt of V-LINK ON message only) is as follows.
+————————————————————————————————————————————————————————————————+
|Parameter |Assign |Value |
+————————————————————————————————————————————————————————————————+
|V—4 Mode |— |Presentation Mode |
|Note Mode |— |OFF |
|Rx Channel |— |1 |
|Tx Channel |— |1 |
|Input Select |— |Ach : 1 |
| | |Bch : 2 |
|Memory Select |— |1 |
|Transition Time|CC#5(Portament Time) |0.0 sec |
|A ch Effect 1 |OFF |OFF |
|A ch Effect 2 |OFF |OFF |
|A ch Effect 3 |OFF |OFF |
|A ch Effect 4 |OFF |OFF |
|B ch Effect 1 |OFF |OFF |
|B ch Effect 2 |OFF |OFF |
|B ch Effect 3 |OFF |OFF |
|B ch Effect 4 |OFF |OFF |
|Transition | | |
|Select |OFF |1 |
|Transformer A |OFF |OFF |
|Transformer B |OFF |OFF |
|Output Fade |OFF |Center |
|BPM Sync |OFF |OFF |
|Video Fader |CC#11(Expression) |A 100% |
+————————————————————————————————————————————————————————————————+
* When V-LINK is off, V-LINK message will be ignored.
* The changes of setting done while V-LINK is on will not be saved.
* When V-LINK is turned off, the setting before V-LINK turned on will be recalled.
V-4_e.book 95ページ 2010年3月11日 木曜日 午後1時51分