Edirol V-4 About the display on preview monitor

21
Checking the inputs and outputs
3. Switch the output channel
Try switching the channel that is being output to the V-4’s preview monitor. Press the preview
select buttons (1 through 4 and OUTPUT) one after another, and verify that the image being output
to your TV monitor changes accordingly.
About the display on preview monitor
Information about settings of V-4 is displayed to the Preview Monitor as below.
• If name of the effect is highlighted, this is the effect selected
• If * mark is displayed after effect name, the effect parameter can be changed with the control dial.
• If ball mark is displayed aside highlighted effect names, it means the effect parameter can be changed
with the control dial.
You can add or reduce the information displayed on the preview monitor by changing the settings
of the V-4 as described on p. 75 or later.
• [**Preset**] is displayed when position 1 of Memory Dial is selected. The 1st setting is fixed to the
factory preset and cannot be changed.
• [*Protect On*] is displayed when Memory Protection is enabled. If this message appears, settings
cannot be changed.
Selection of preview output
Current position and
setting of Output Fader
Settings of
channel B effects
Channel selection
of video fader and
input selection
Settings of
BPM and TAP
Settings of
channel A effects
Selection of
Transition Effect
Setting of
Transformers
V-4_e.book 21ページ ２０１０年３月１１日 木曜日 午後１時５１分