Edirol V-4 , Changing the assignment of the BPM sync button (BPM , SYNC)

50
Editing the front panel assignments
8. Return to the previous screen.
When you have made your selection, press the menu button to return to the previous screen. Press
the button three times to exit the menu screen and return to the previous screen.
Changing the assignment of the BPM sync button (BPM
SYNC)
With the factory settings, and when the memory dial is set to 1, BPM sync is set to switch between
A and B by using a transition effect. The transition speed will be the BPM shown in the BPM
indicator.
1. Turn the memory dial.
Select the memory number (2 through 8) whose assignments you want to change.
2. Press the menu button (MENU).
Press the menu button (MENU) located in the upper left of the panel. The settings edit menu will
appear on the TV screen connected to the preview output.
3. Select “BPM/SYNC.”
Use the cursor buttons to select “BPM/SYNC.” The memory dial number you select is displayed
following “BPM/SYNC.” If you have selected memory number 2, this will indicate [Mem2].
4. Press the enter button (ENTER)
Press the enter button to proceed to the setting screen.
If you select an effect with the “*” mark after the effect name, the effect value can be changed with
the control dial.
V-4_e.book 50ページ ２０１０年３月１１日 木曜日 午後１時５１分