46

Using the V-44SW with Other Devices

■

Controlling the V-44SW from an External Device Via MIDI

When V-LINK mode (p. 48) is off, you can transmit the unit’s button and knob operations using MIDI messages.
Conversely, you can also use MIDI messages transmitted by external devices to control the V-44SW’s button and knob settings.

●

For more details about MIDI messages, refer to the MIDI Implementation. The MIDI Implementation can be
downloaded from the Roland Systems Group website. http://rolandsystemsgroup.net
<Buttons and Knobs for Which MIDI Messages Are Received>
You can use MIDI to link operation of multiple V-44SWs.

●

If Linking Operation of Multiple V-44SWs

Select “9. MIDI Setup” from the menu and set “4: MIDI Out/Thru Switch” as follows.
Master V-44SW: Out
V-44SWs other than the master: Thru

●

If Linking Operation to Use Multi-Screen Output

For instructions on linking operation of V-440HDs and V-44SWs, refer to “Using the V-44SW with a V-440HD for Multi-Screen
Output” (p. 44).
You can stop reception of MIDI signals temporarily by pressing the [MIDI] button so its light is turned off. This stops linked
operation via MIDI and enables independent functioning of one individual V-44SW.
To restore linked operation through MIDI, press the [MIDI] button once more so the button is lit.

Linking Operation Via MIDI

Temporarily Cutting Linked Operation

9
8 7
12
2
14 5
3
3OUTPUT FORMAT Button
1[MIDI] Button
2PANEL PRESET Buttons
4[TIME] Knob
5[OUTPUT FADE] Button
12 [P in P] Button
11 [KEY] Button
10 TRANSITION Select Buttons
8SD VIDEO [1]–[4] Buttons
7HD/RGB [1]–[4] Buttons
6[TAKE] Button
9[TRANSITION TIME] Knob
6
11
10
V-44SW_e.book 46ページ ２００６年１０月２３日　月曜日　午後３時２５分