Step 1 Hardware Installation

Network cards are sensitive to static electricity. Avoid touching its electrical components. To eliminate static electricity, always touch the chassis of your computer before handling the card. Backup your driver and use the copy as the working copy to protect the original from accidental damage.

1.Switch off the computer, unplug the power cord, and remove the computer cover.

2.Select an unused PCI bus-master slot and remove its protective bracket.

3.Carefully insert the card and press until the whole edge connector is firmly seated inside the slot.

4.Screw the card’s bracket securely into the PC chassis.

5.(Optional step) Attach the optional Wake-On-LAN cable. If you require Wake-On-LAN capability from a powered-off state, attach one end of the three-pin Wake-On-LAN cable to the connector on the top edge of the card. Attach the other end to the "5 V Standby" connector on the computer’s motherboard. To locate this connector, refer to your computer’s installation manual.

6.Connect the SpeedStream® 1020 PCI adapter directly to a 10Base-T or 100Base-TX hub or switch using UTP cable. The maximum allowable length of UTP cable connections is 328 ft (100 meters).

7.Replace the computer cover; then power on the computer. The computer BIOS should automatically configure the SpeedStream® 1020 PCI adapter. However, if you have an older computer, you may have to manually configure the computer’s BIOS settings. For more information, see the Troubleshooting section of this Quick-Start Guide.

8.Install the appropriate network driver for your operating system. The driver floppy disk that accompanies the SpeedStream® 1020 PCI adapter contains all the network operating system drivers supported by this card. Please read the “RELEASE.TXT” file on the floppy disk for a list of all drivers. A text file included in each folder details the proper installation procedure for that operating system.

Testing Program: If the host computer does not automatically configure the SpeedStream® 1020 PCI adapter, or if there is a problem with the card, run the DOS-based Testing Program to view the computer’s BIOS settings. Boot the computer to a full DOS environment (not a DOS window) and run the Testing Program, “ACCTEST.EXE”, from the driver floppy disk. If any of the diagnostic tests fail, reboot your computer and run the diagnostics again to see if the problem persists. If it does, record the failure indicated and contact Technical Support for assistance.

1

2

Page 2 Page 4
Page 3
Image 3
Efficient Networks PCI 10/100 quick start Hardware Installation, Screw the card’s bracket securely into the PC chassis
Page 2 Page 4

PCI 10/100 specifications

Efficient Networks PCI 10/100 is a network interface card (NIC) that stands out for its blend of performance, reliability, and compatibility in connecting computers to Ethernet networks. Designed to support both 10 Mbps and 100 Mbps Ethernet standards, this card provides flexibility for users as they transition from older networking technologies to faster connections.

One of the main features of the Efficient Networks PCI 10/100 is its dual-speed capability. This allows for automatic detection of the network speed, ensuring optimal performance regardless of whether the network operates at 10 Mbps or 100 Mbps. This adaptability makes it an excellent option for upgrading legacy systems without requiring a complete overhaul of infrastructure.

Another key characteristic is its PCI interface, which enables straightforward installation in desktop PCs. The card meets the PCI 2.2 specification, providing a stable connection to the motherboard and ensuring compatibility with a wide range of operating systems. It supports plug-and-play functionality, simplifying installation by automatically configuring itself upon being connected to the computer.

The Efficient Networks PCI 10/100 is equipped with advanced features like full-duplex support, allowing for simultaneous sending and receiving of data packets. This feature enhances overall throughput and reduces latency, making it suitable for applications that require real-time data transmission, such as video conferencing and online gaming. Additionally, the card’s support for half-duplex operation ensures compatibility with older Ethernet networks.

In terms of technologies, the NIC utilizes Ethernet framing for data encapsulation and supports various networking protocols. It also features a built-in LED indicator that provides visual feedback on network activity and connection status, helping users troubleshoot potential issues with ease.

The card is designed with efficiency in mind, consuming low power while delivering high performance, which is crucial for environmentally conscious consumers and businesses aiming to reduce their power footprints.

In conclusion, the Efficient Networks PCI 10/100 is a versatile and reliable network interface card characterized by its dual-speed capabilities, straightforward installation, advanced data transmission features, and support for various networking technologies. These features combined make it a practical choice for users looking to enhance their network connectivity without sacrificing compatibility or performance.
Top Page Image Contents