B15583/R0/204EN&205EN/U&C 8/6/06 1:54 PM Page 15
5. INSTALLATION
WARNING: Do not use the CO Alarm on an intermittent basis, or as a portable detec- tor for the spillage of combustion products from fuel burning appliances or chimneys.
5.1INSTALLATION PROCEDURE
Once you have selected a suitable location, power up the unit by smoothly withdrawing the red “PULL” tab at the top left hand corner of the alarm, (see Figure 5b). The green, red & amber lights will immediately flash in
GAS
sequence to show they ENTR are working - this is HOLE
normal.
MOUNTING
HOLES
PRESS HER
FIRST AND
SLIDE UP
Figure 5a
Once you have selected a suitable location, open the battery compartment by sliding up the cover as shown in figure 5a.
(If the batteries are supplied loose then install the batteries ensuring they are orientated correctly as shown in the battery box. The green, red & amber lights will immediately flash in sequence to show they are working - this is normal).
15