B15583/R0/204EN&205EN/U&C 8/6/06 1:54 PM Page 10
Reset Memory by holding down the test button for over 20 seconds until the red light stops flashing. Cover the horn with a cloth to muffle the alarm during this time.
Please note that the memory will also be reset when the unit is unpowered.
4.WHERE TO PLACE CO ALARMS
4.1Ideally a Carbon Monoxide Alarm should be installed in:
-Every room containing a fuel burning appliance, and
-Remote rooms where occupants spend a considerable amount of time
-Every bedroom.
However if the number of Carbon Monoxide Alarms is limited, the following points should be considered when deciding where best to fit the alarm(s)
-If there is an appliance in a room where people sleep, place a CO Alarm in this room and
-Locate a CO alarm in a room containing a flueless or
-Locate an alarm in a room where the occupant(s) spend most of their time (e.g. sitting room) and
-In a bedsit, the CO alarm should be placed as far away from the cooking appliance as possible, but near to where the person sleeps and
-If the appliance is in a room not normally used, such as a boiler room, the CO alarm should be placed just outside the room so that the alarm will be heard more easily.
10