Manuals / Brands / Computer Equipment / Projector / Eiki / Computer Equipment / Projector

Eiki EIP-250, EIP-2600 Picture Adjustment (Picture Menu) (Continued)

1 70

Download 70 pages, 3.44 Mb

42

55

55

5 Progressive

Note

•In NTSC or PAL60Hz, even if the 3D Progres-

sive mode has been set, the three-two pull

down enhancement will be enabled automati-

cally when the film source has been entered.

•When the image is blurred or noisy, switch to

the optimal mode.

*The film source is a digital video recording with the

original encoded as is at 24 frames/second. The

projector can convert this film source to progres-

sive video at 60 frames/second with NTSC and

PAL60Hz or at 50 frames/second with PAL50Hz

and SECAM to play back a high-definition image.

Selectable

items

2D

Progressive

3D

Progressive

Film Mode

Description

Useful to display fast-moving images

such as sports.

Useful to display relatively slow-

moving images such as drama and

documentary more clearly.

Reproduces the image of film source*

clearly. Displays the optimized image of

film transformed with three-two pull down

(NTSC and PAL60Hz) or two-two pull

down (PAL50Hz and SECAM) enhance-

ment to progressive mode images.

77

77

7 Lamp Setting

Note

•In the Eco + Quiet mode, the fan sound and

power consumption are lower than those in

the Bright mode. (Projection brightness de-

creases as shown in the chart.)

Selectable

items

Eco + Quiet

Bright

Brightness and Power consumption

EIP-2600 Approx. 70%

EIP-250 Approx. 80%

100%

Menu operation n Page 38

Picture Adjustment (“Picture” Menu)(Continued)

66

66

6

Reducing Image Noise (DNR)

Note

Set “DNR” to “Off” in the following cases:

•When the image is blurry.

•When the contours and colors of moving im-

ages drag.

•When TV broadcasts with weak signals are

projected.

Selectable

items

Off

Level 1

Level 2

Description

The DNR function is not activated.

Sets the DNR level for viewing a

clearer picture.

Video digital noise reduction (DNR) provides high

quality images with minimal dot crawl and cross

color noise.

•This function is available for 480I and 576I

signals using COMPUTER/COMPONENT or

DVI (EIP-2600 only) input.

•This function is available for all signals with

S-VIDEO and VIDEO input.

Info

Contents

Main ii IMPORTANT Model No.: Serial No.: SPECIAL NOTE FOR USERS IN THE U.K. DANGER: Introduction W ARNING: directly. Be especially careful that children do not stare directly into the beam of light. WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. W ARNING: For EIP-2600 INFORMATION WARNING: For EIP-250 INFORMATION Declaration of conformity How to Read this Owners Manual projector. MENU/HELP button For Future Reference Buttons used in this operation Contents Preparing Introduction Quick Start Setup 5 Reference Appendix 1. Read Instructions 2. Retain Instructions IMPORTANT SAFEGUARDS 11. Power Sources 12. Grounding or Polarization 13. Power-Cord Protection 14. Lightning 18. Damage Requiring Service 19. Replacement Parts 20. Safety Check 21. Wall or Ceiling Mounting 22. Heat 8 Observe the following safeguards when setting up your projector. Caution regarding usage of the projector Other connected equipment Using the projector in other countries How to Access the PDF Owners Manuals Accessories Optional accessories Supplied accessories Projector Part Names and Functions Numbers in Z refer to the main pages in this owners manual where the topic is explained. Rear View Part Names and Functions (Continued) Terminals Page 14 Caution Part Names and Functions (Continued) Inserting the Batteries Insert the lower tab of the cover into the opening, and lower the cover until it clicks in place. Insert the batteries. Pull down the tab on the cover and remove the cover towards the direction of the arrow. Usable Range When using the remote control Quick Start Setup and Projection 4. Adjust the projected image with the Setup Guide _PP. 26, 27 7. Turn the computer on COMPUTER _P. 29 Setting up the Projector Side View Setting up the Projector Standard Setup (Front Projection) Example of standard setup Projection (PRJ) Mode Indication of the Projection Image Size and Projection Distance Setting up the Projector (Continued) Screen Size and Projection Distance STRETCH Mode (16:9) Minimum [L1] Maximum [L2] Picture (Screen) size Connecting the Projector to Other Equipment Terminals on the Projector Connecting the Projector to Other Equipment (Continued) is only for EIP-2600. is only for EIP-2600. Connecting the Power Cord Controlling the Projector by a Computer When connecting to a computer using an RS-232C serial control cable and a DIN- D-sub RS-232C adaptor Turning the Projector On/Off On-screen display (confirmation message) Turning the Projector on STANDBY/ON button Turning the Power off (Putting the Projector into Standby Mode) Image Projection 1 FOCUS 3 ZOOM4 ENTER 2 HEIGHT ADJUST Adjusting the Projected Image 1 Adjusting the Focus You can adjust the focus with the focus ring on the projector. 3 Adjusting the Height Correcting Trapezoidal Distortion 3 Image Projection (Continued) Displaying the Black Screen and Turning off the Sound Temporarily Adjusting the Volume Switching the Input Mode Select the appropriate input mode for the connected equipment. Resize Mode Image Projection (Continued) VIDEO * VIDEO/DTV * * * About Copyrights Operating with the Remote Control Displaying and Setting the Break Timer 2 Switching the Eco+Quiet Mode Displaying the Pointer Auto Sync (Auto Sync Adjustment) Freezing a Moving Image Selecting the Picture Mode You can select the appropriate picture mode for the projected image, such as movie or video game. Displaying an Enlarged Portion of an Image Operating with the Remote Control (Continued) The following shows the items that can be set in the projector. Menu Items Reset PAGE 1 PAGE 2 Picture SCR - ADJ PRJ - ADJ Help Menu Items (Continued) Main menu Sub menu *5 This item is available for EIP-2600 only. Projector adjustment (PRJ-ADJ) menu COMPUTER/ DTV The items you can set with the Help menu Help menu Help menu n Page 48 Menu Selections (Adjustments) Press MENU/HELP. 2 Using the Menu Screen Press P or R and select Bright to adjust. The selected item is highlighted. Press ENTER. To adjust the projected image while watching it Press ENTER. 40 Picture Adjustment (Picture Menu) 1 1 QPAGE1 QPAGE2 1 1 1 Selecting the Picture Mode 41 2 Adjusting the Image 3Adjusting the Color Temperature Values on CLR Temp are only for general standard purposes. P R Picture Adjustment (Picture Menu) (Continued) 6 Reducing Image Noise (DNR) 43 Adjusting the Projected Image (SCR - ADJ Menu) O button 1 Setting the Resize Mode 2Adjusting the Image Position You can move the projected image vertically. Adjusting the Projected Image (SCR - ADJ Menu) (Continued) 5 5 5 5 5 Closed Caption 77 Selecting the Setup Guide 8Reversing/Inverting Projected Images Adjusting the Projector Function (PRJ - ADJ Menu) 45 1 4 4 5 Adjusting the Projector Function (PRJ - ADJ Menu) (Continued) 7 7 8 This function changes the fan rotation speed. 9 9 47 Enter the same keycode in Re- confirm. Locking the Operation Buttons on the Projector a Taking the Keylock off a Locking the Operation Buttons Troubleshooting with the Help Menu Utilizing the Help Menu Functions 6 2 Cleaning the lens Maintenance Maintenance Indicators Top View Page Regarding the Lamp Lamp Caution Concerning the Lamp Replacing the Lamp Caution 53 Removing and Installing the Lamp Unit Warning! Disconnect the power cord. Remove the lamp unit cover. 6 Connect the power cord. Reset the lamp timer. Regarding the Lamp (Continued) ENTER button MENU/HELP Connecting Pin Assignments DVI-I Terminal : 29 pin connector (EIP-2600 only) C4 C2 C1 Connecting Pin Assignments (Continued) RS-232C Terminal : mini DIN 9 pin female connector RS-232C Terminal : D-sub 9 pin male connector of the DIN-D-sub RS-232C adaptor RS-232C Cable recommended connection : D-sub 9 pin female connector USB Terminal : Type B USB connector RS-232C Specifications and Commands C1 C2 C3 C4 P1 P2 P3 P4 RS-232C Specifications and Commands (Continued) is only for EIP-2600. Commands ProjectorComputer Example: When turning on the projector, make the following setting. is only for EIP-2600. RS-232C Specifications and Commands (Continued) is only for EIP-2600. Page Computer Computer Compatibility Chart * EIP-2600 only DTV Pixel Clock: 12-170 MHz Sync signal: Compatible with TTL level Compatible with sync on green signal * EIP-2600 only Troubleshooting Troubleshooting (Continued) Specifications Dimensions Units: inches (mm) Index U.S.A. Japan & Worldwide China Deutschland & sterreich Canada