5.The software will prompt you to press the reset button. (reset button is located on the back of the EZ 250)
Reset Button
6.After the programming status disappears disconnect the cables from the computer and press the reset button on the back of the EZ 250 and you are ready for the installation of the EZ 250
Reset Button
Advanced Programming
(Changing button functions is not difficult. That said, please bear in mind that calling us
for service after you have modified the code could make you subject to additional
charges)
1.Same as steps 1 thru 7 in Standard Programming
2.You now can select what you would like each button to do thru the EZloader Data base by going to the button and clicking on the drop down arrow and selecting the new feature for that button.
3.After you are done with each button Select Upload New Configuration to Control
Or
- 12 -
