![](/images/new-backgrounds/1113862/11386243x1.webp)
6.Place Diffuser back into lens and then back onto Controller, repeat until all 10 buttons are identified.
7.If the Label you need is not on the printed sheet then open up EZ 250 software
8.After EZ 250 software is open select labels
9.Select layout
10.Select the button you would like to change and click on it then type in the new label
11. After your done customizing the labels, select print (Use transparencies for best results)
Note: blank transparencies not provided they can be obtained at a local office supply store
- 18 -