34
APPENDIX
The Wireless Remote Control Unit is not only able to operate the projector b ut also usable as a wireless mouse for
most Personal Computers. The POINT buttons and the two CLICK buttons are us ed for the wireless mouse operation.
The wireless mouse is available only when PC mouse pointer is disp layed on the screen. When the menu or the
indicator of the projector is displayed on the screen instead of the PC m ouse pointer, the wireless mouse cannot be
used.
To use the Wireless Remote Control Unit as the Wireless Mouse for a P ersonal Computer, installation of the mouse
driver (not supplied) is required. Make sure that the mouse driver is properly installed in your computer. And make sure
that the mouse port of the computer connected to Control Port is activate d.
Connect the mouse port of your computer to the Control Port of
the projector with the Control Cable. (Refer to page 10 to 13 for Note: When the computer has no
connection.) mouse port, connect the Serial
Port of the computer to Control
2
Turn the projector on first, and then turn on your computer. Port of the projector with the
When the computer is switched on first, the Wireless Mouse ma y Control Cable for Serial Port.
not work properly.
OPERATING WIRELESS MOUSE
When controlling the pointer of the computer, operate the Wireless
Mouse with POINT button, SELECT button, and RIGHT CLICK
button on the Wireless Remote Control Unit.
POINT button
Used to move the pointer. The pointer is moved corresponding
with the direction you are pressing.
SELECT (LEFT CLICK) button
This button has the same function as the left button in a PC
mouse.
RIGHT CLICK button
This button has the same function as the right button in a PC mouse.
Pressing this button does not affect any operation when in Menu m ode.
1