LC-SM2
8

PREPARATION

This projector uses nominal input voltages of 100-120 V or 200-
240 V AC. The projector automatically selects the correct input
voltage. It is designed to work with single-phase power systems
having a grounded neutral conductor. To reduce the risk of
electrical shock, do not plug into any other type of power system.
Consult your authorized dealer or service station if you are not
sure of the type of power supply being in use.
Connect the projector with the peripheral equipment before
turning the projector on. (Refer to pages 11 13 for connection.)
CONNECTING THE AC POWER CORD
For safety, unplug the AC Power Cord when the appli-
ance is not used.
When this projector is connected to the outlet with the
AC Power Cord, the appliance is in Stand-by Mode
and consumes a little electric power.

NOTE ON THE POWER CORD

The AC Power Cord must meet the requirement of the country where you use t he projector.
Confirm the AC plug type with the chart below. The proper AC power cord m ust be used.
If the supplied AC Power Cord does not match the AC outlet, contact your sales dealer.