31
1
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select IMAGE
and press the SELECT button. Another dialog box PICTURE
IMAGE ADJUSTMENT Menu will appear.
2
Press the POINT DOWN button and a red-arrow icon will appear.
Move the arrow to the item that you want to adjust by
pressing the POINT UP/DOWN buttons. To change the
value, press either the POINT RIGHT button or the
POINT LEFT button.
Color
Press POINT LEFT button to lighten the image, and press
POINT RIGHT button to deepen the image. (From 0 to 63.)
Tint
Press POINT LEFT button to increase purple, and press POINT
RIGHT button to increase green. (From 0 to 63.)
White balance (Red I Green I Blue)
Move the arrow to the color that you want to adjust. Press
POINT LEFT button to lighten the color, and press POINT
RIGHT button to
deepen the color. (From 0 to 63.)
Contrast
Press POINT LEFT button to decrease contrast, and press
POINT RIGHT button to increase contrast. (From 0 to 63.)
Brightness
Press POINT LEFT button to darken the image, and press POINT
RIGHT button to brighten the image. (From 0 to 63.)
Sharpness
Press POINT LEFT button to soften the image, and press POINT
RIGHT button to sharpen the image. (From 0 to 15.)
Gamma
Press either POINT LEFT button or POINT RIGHT button to obtain
better balance of contrast. (From 0 to 16.)
Each of the keys operates as follow.
Reset
•..
Recalls the data previously adjusted.
Stored
....
Stores the data in the memory.
Quit Closes the PICTURE IMAGE ADJUSTMENT Menu.
The normal picture level is preset on restored anytime you press the
NORMAL button (located on the Top Control or on the Remote
Control Unit). The “Normal” display will be displayed on the s creen
for a few seconds. this projector at the factory and can be