Video Input
Input Source Selection (Component, RGB Scart
Direct Operation
Choose Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control.
Before using these buttons, correct input source should be selected through Menu operation as described below.
Menu Operation
Top Control | INPUT button |
Computer 1
Computer 2
Video
REMOTE CONTROL
1 | Press the MENU button to display the | ||
Menu. Use the Point ◄►buttons to move the red frame | |||
|
| pointer to the Input Menu icon. | |
2 | Use the Point ▲▼ buttons to move the red arrow | ||
pointer to Computer 2 and then press the SELECT | |||
|
| button. |
|
3 | After the Source Select Menu appeared for Computer | ||
2, move the pointer to Component or RGB(Scart) and | |||
|
| then press the SELECT button. | |
|
| When the input source is coming from video | |
| Component | ||
|
|
| equipment connected to the COMPUTER |
|
|
| |
|
|
| IN 2/COMPONENT IN terminal with a |
|
|
| |
Input Menu
Computer
2
COMPUTER button
Computer 1
Computer 2
Input Menu icon
Move the pointer (red arrow) to Computer 2 and press the SELECT button.
RGB (Scart)
Note:
When the input source is coming from video equipment connected to the COMPUTER IN 2/COMPONENT IN terminal with a Scart- VGA Cable, select RGB (Scart).
Source Select Menu
Move the pointer to Component or RGB(Scart)and press the SELECT button.
•When the Input Search function is set to “On1” or “On2”, the input signal will be searched automatically (p.47).
37
