Setting

Enter a PIN code

Use the Point ▲▼ buttons to enter a number. Press the Point button to fix the number and move the red frame pointer to the next box. The number changes to “.” If you fixed an incorrect number, use the Point button to move the pointer to the number you want to correct, and then enter the correct number.

Repeat this step to complete entering a four-digit number.

After entering the four-digit number, move the pointer to “Set.” Press the SELECT button so that you can start to operate the projector.

If you entered an incorrect PIN code, “PIN code” and the number () will turn red for a moment. Enter the correct PIN code all over again.

Change the PIN code lock setting

Use the Point ◄► buttons to select Off, On1, or On2 and then move the pointer to “Quit” with the Point button. Press the SELECT button to close the dialog box.

Enter a PIN code

After a correct PIN code is entered, the following dialog box appears.

Change the PIN code lock setting

Use the Point ◄► buttons to switch between the options.

Change the PIN code

Change the PIN code

The PIN code can be changed to your desired four- digit number. Press the Point button to select “PIN code change” and press the SELECT button. The New PIN code input dialog box appears. Set a new PIN code.

caution:

when you have changed THE PIn code, write down the new pin code in column of the pin code no.. memo on page 70, and keep it securely.. If you forget your PIN code, the projector can no longer be started..

51

Page 51
Image 51
Eiki LC-XB42 owner manual Change the PIN code lock setting, Enter a PIN code, Change the PIN code lock setting