COMPUTER MODE

 

ADJUST PICTURE IMAGE MANUALLY

1

Press the MENU button and the ON-SCREEN MENU will

 

appear. Press the POINT LEFT/RIGHT buttons to select

 

IMAGE and press the SELECT button. Another dialog box

 

PICTURE IMAGE ADJUSTMENT Menu will appear.

2

Press the POINT DOWN button and a red-arrow icon will

appear. Move the arrow to the item that you want to change by

pressing the POINT UP/DOWN buttons. To change the value, press either the POINT RIGHT button or the POINT LEFT button.

Fine sync.

Adjust the picture as necessary to eliminate flicker from the display. (From 0 to 255.)

Total dots

The number of the total dots in one horizontal period. Adjust the number to match your PC image.

White balance (Red / Green / Blue)

Move the arrow to Red, Green, or Blue that you want to adjust. Press POINT LEFT button to adjust the color of image lighter, and press POINT RIGHT button to adjust deeper. (From 0 to 63.)

Contrast

Press POINT LEFT button to adjust the image lighter, and press

POINT RIGHT button to adjust deeper. (From 0 to 63.)

Brightness

Press POINT LEFT button to adjust the image darker, and press

POINT RIGHT button to adjust brighter. (From 0 to 63.)

Each of the keys operates as follow.

Reset Recalls the data previously adjusted.

Stored Stores the adjusted data in the memory.

Quit Closes the PICTURE IMAGE ADJUSTMENT Menu.

It indicates the roughly level of the item.

Move the arrow to the item and press

POINT RIGHT / LEFT button.

Close the PICTURE

IMAGE ADJUSTMENT

Menu.

 

 

NORMAL FUNCTION

GB

 

 

 

 

 

The normal picture level is preset on this projector at the factory and can be restored anytime you press the NORMAL button (located on the Top Control or on the Remote Control Units). The “Normal” display will be displayed on the screen for a few seconds.

Normal

26