COMPUTER MODE

AUTO IMAGE FUNCTION

The Auto Image function is provided to automatically adjust Fine sync., Total dots, and Picture Position for most computers.

1

Press the MENU button and the ON-SCREEN MENU will

 

appear. Press the POINT LEFT/RIGHT buttons to select

 

AUTO IMAGE

and press the SELECT button.

 

Another dialog box AUTO IMAGE Menu will appear.

2

Move the arrow to an item that you want to adjust by pressing

the POINT UP/DOWN button. Change the setting On or Off by

pressing the SELECT button.

Fine sync.

Adjust the picture as necessary to eliminate flicker from the display. This item can be adjusted manually. (Refer to page 26.)

Total dots

The number of the total dots in one horizontal period. This item can be adjusted manually. (Refer to page 26.)

Position

Adjustment of the position of the image. This item can be adjusted manually. (Refer to page 27.)

3

Move the arrow to “Go!” and press the SELECT button to start

the Auto Image function.

 

 

This adjustment can be executed by pressing AUTO IMAGE

 

 

button on the Top Control and the Remote Control Unit.

 

 

 

 

 

 

Stored

Stores the On/Off setting of each item.

 

 

 

 

 

 

Go!

Starts the Auto Image Adjustment.

 

 

 

 

 

 

Quit

Closes the AUTO IMAGE ADJUSTMENT Menu.

NOTE : The Fine sync., Total dots, and Picture Position of some computers may not be fully adjusted with the Auto Image Function. In that case, manual adjustment is required to make fine image. (Refer to page 26 to adjust "Fine sync." or "Total dots" and page 27 to adjust Picture Position.)

It starts the adjustment on the item set to "On".

It terminates the PICTURE IMAGE ADJUSTMENT Menu.

Move the arrow to the item and then press the SELECT button.

PICTURE POSITION ADJUSTMENT

The position of the image can be adjusted vertically and horizontally through PICTURE POSITION

 

ADJUSTMENT.

GB

 

1

Press the MENU button and the ON-SCREEN MENU will

 

appear. Press the POINT LEFT/RIGHT buttons to select

 

POSITION

and press the SELECT button. The PICTURE

 

POSITION dialog box will appear.

2

Move the image by pressing the POINT UP / DOWN / RIGHT /

LEFT buttons.

 

To cancel POSITION mode, press the any buttons except SELECT, RIGHT CLICK, POINT or LASER button. To recall the position previously adjusted, press NORMAL button.

PICTURE POSITION

dialog box

Press the POINT UP /

DOWN / RIGHT / LEFT buttons to move the image

27