SETTING

Power management

This function turns Projection Lamp off when this projector detects signal interruption and is not used for a certain period in order to reduce power consumption and maintain the Lamp-life. (This projector is shipped with this function ON.)

Power Management function operates to turn Projection Lamp off when the input signal is interrupted and any button is not pressed over 5 minutes. This function operates as follows;

1.When any input signal is interrupted, “No signal” and the counting down display appears (for 5 minutes).

2.When Projection Lamp turned off, READY Indicator turns off. Cooling Fans operate and Projection Lamp is turned off for 90 seconds. (During this "Cooling Down" period, projector cannot be turned on.)

3.When Projection Lamp has cooled down, READY Indicator flashes and Projection Lamp can be turned on again (Power Management mode).

In this Power Management mode, Projection Lamp is automatically turned on when the input signal connected or projector is operated with any button on Top Control or on Remote Control Unit again.

On start

When this function is “On,” projector is automatically turned on just by connecting AC Power cord to a wall outlet.

Note ; Be sure to turn projector off properly (refer to the section “TURNING OFF THE PROJECTOR” on P19). If projector is turned off in the wrong steps, On Start function does not operate properly.

Remote control

This projector has two different remote control codes; the factory-set normal code (Code 1) and the secondary code (Code 2). This switching function prevents remote control operation mixture (jam) when operating several projectors or video equipment together.

When operating projector in “Code 2,” both projector and Remote Control Unit must be switched to “Code 2.”

To change the code of Projector;

Set Remote control in the SETTING MENU to “Code 2.”

To change the code of the Remote Control Unit;

Press both MENU and IMAGE buttons on Remote Control Unit together for over 10 seconds.

After changing the code, make sure Remote Control operates properly.

To return to the normal code (Code 1), operate both projector and Remote Control in the ways above again.

NOTE : When batteries of Remote Control Unit are replaced or ALL- OFF switch is turned to “ALL-OFF,” the remote transmit code automatically returns to the normal code (Code 1).

Lamp counter reset

This function is used to reset Lamp Replace Counter. When replacing Projection Lamp, reset Lamp Replace Counter by using this function. Refer to page 39 for operation.

Time left until Lamp off.

Press SELECT button at this icon to display other items.

Press SELECT button at this icon to display previous items.

Move the pointer to the item and then press POINT LEFT/RIGHT button(s).

Move the pointer to Lamp counter reset and then press SELECT button. The message “Lamp replace counter reset?” is displayed.

36

Page 35 Page 37
Page 36
Image 36
Eiki LC-XNB3W owner manual To change the code of Projector, To change the code of the Remote Control Unit
Page 35 Page 37

LC-XNB3W, LC-XNB3 specifications

The Eiki LC-XNB3 is a powerful and versatile multimedia projector designed for professional presentations, educational institutions, and corporate environments. This projector combines advanced technology and practicality to deliver an exceptional viewing experience. With its compact design and lightweight structure, the LC-XNB3 is easy to transport and set up, making it a valuable asset in any meeting room or classroom.

One of the standout features of the Eiki LC-XNB3 is its impressive brightness rating of 3800 lumens. This high lumen output ensures that even in well-lit environments, presentations remain vibrant and clear. The projector's XGA resolution of 1024 x 768 pixels provides sharp and detailed images, making it suitable for displaying intricate graphics, spreadsheets, and video content with precision.

The LC-XNB3 employs a unique 3LCD technology, which enhances color brightness and improves overall image quality. This technology allows for a wider color gamut, resulting in vivid and lifelike images that captivate audiences. In addition, the projector boasts a high contrast ratio, providing deeper blacks and brighter whites to create more dynamic visuals.

Another notable characteristic of the Eiki LC-XNB3 is its connectivity options. It offers multiple input ports, including HDMI, VGA, and USB, allowing users to connect a variety of devices such as laptops, tablets, and smartphones. This flexibility ensures compatibility with various media sources and simplifies the process of sharing content during presentations.

The LC-XNB3 also features built-in speakers, providing clear audio that complements visual content without the need for additional external speakers. Additionally, the projector offers a range of presentation modes to optimize performance based on the environment and type of content being displayed.

For maintenance and longevity, the Eiki LC-XNB3 is equipped with a long-lasting lamp that can provide up to 6000 hours of use in eco mode. This durability minimizes the frequency of lamp replacements, reducing overall operating costs.

In summary, the Eiki LC-XNB3 is a highly capable multimedia projector that excels in delivering high-quality images and sound for various applications. Its robust features, impressive brightness, and versatile connectivity options make it an ideal choice for anyone looking to enhance their presentation capabilities.
Top Page Image Contents