Eiki LC-XT1 instruction manual Pull out the terminal by holding the handle

LC-XT1

1

2

3

This projector applies various input/output terminals and 4 terminal slots for expansion to tune to diversity of signals from computers and video equipment. 4-built-in Terminal Slots enable you to arrange desired combinations of input sources just by changing Terminal

Boards. For Terminal Boards, contact the sales dealer where you purchased the projector.

Remove 2 Screws on the terminal.

Pull out the terminal by holding the handle.

Replace the terminal. Insert the terminal along Guide to fit Plug into Socket.

4 Tighten the screws to secure the terminal.

.