Eiki LC-XT1 instruction manual This projector uses nominal input voltages

LC-XT1

This projector uses nominal input voltages of 100-120

Vor 200-240 V AC. The projector automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system.

Consult your authorized dealer or service station if you are not sure of the type of power supply being in use. Connect the projector with the peripheral equipment before turning the

projector on. (Refer to pages 12 15 for connection.)

.